Text: 248-904-1874 | Call: 800-498-1788 | Send an email

How to Measure

1. Measure only the open area of your garage door jam to door jam or side to side. (Width)

2. Measure only the open area of your garage door opening from the floor to bottom of top header. (Height)

3. Please note we will be adding 1/2 inch to 1 inch to your Height and 1 inch to each side for mounting.
How to Measure for Garage Door Screens
How to Measure for Garage Door Screens

Measuring is simple. All we need is the open area top to bottom and side to side. We add a 1/2 inch-1 inch to the top and 1 inch to each side for mounting. You can always move the screen up and down and side to side for a perfect fit
Actual sizes of screen on our order page are 2 inches wider than stated and almost 1 inch taller

For Example : 16' x 7' screen is actually 16 ft 2 inches x 7 ft 1 inch

A 9' x 7' screen is actually 9 ft 1 inch x 7 ft 1 inch


How to Measure for Your Garage Door Screens



Measuring a Garage with Angled Door Frame



We need five measurements. See the color coded explanation below.

1. RED - top of angle to top of angle (inches)

2. BLUE - center mark between angles (inches)

3. GREEN - under header to floor (inches)

4. ORANGE - bottom of angle to floor (inches)

5. YELLOW angle top to bottom, angles must be the same on both sides (inches)

Additional Notes



If your measurements do not compare with our listed sizes we can make one for you that will fit your requirements.

There is a $25 pattern charge for custom made sizes only. To price a custom screen just find one of our stock screens that is close to the size you need and add $25 to that screens price.

We also can make screens with angles if you have a garage with angled brick work or woodworking . There is a $25 stencil charge for this service also.